Cybernion
← Insights

United States

What Is FedRAMP?

30 Aug 2026 · Updated 30 Aug 2026

FedRAMP is the US government-wide program that authorises cloud services for federal agencies, based on NIST 800-53 controls and organised into Low, Moderate and High impact levels. One authorization can be reused across agencies. It is modernising through the FedRAMP 20x initiative toward automated, continuous validation. Its Australian counterpart is an IRAP assessment against the Information Security Manual, though the two work differently.

FedRAMP is the reason a cloud provider can sell the same service to many US federal agencies without being reassessed each time. For a provider running cloud services where government is a market, on either side of the Pacific, it is worth understanding how it works and how Australia does the same job differently.

What is FedRAMP?

FedRAMP, the Federal Risk and Authorization Management Program, is a US government-wide program that standardises the security assessment, authorization and continuous monitoring of cloud products and services used by federal agencies. Its security requirements are based on NIST SP 800-53 controls, tailored for cloud environments.

The core idea is do once, use many times. Rather than every agency separately assessing a cloud service, FedRAMP produces a single authorization that other agencies can reuse, which saves duplicated effort across government. It was codified in law by the FedRAMP Authorization Act, passed as part of the 2023 National Defense Authorization Act in December 2022, giving the program a statutory footing. For a cloud provider, a FedRAMP authorization is effectively the entry ticket to the US federal cloud market. Its role is close to that of an IRAP assessment in Australia, though the two operate differently, as covered below.

What are the FedRAMP impact levels?

FedRAMP authorises cloud services at three impact levels: Low, Moderate and High. The level is set by the FIPS 199 categorisation, which rates the potential impact on an organisation if the confidentiality, integrity or availability of the information were compromised.

Moderate impact is by far the most common, accounting for the large majority of authorizations, because most government data that moves to cloud falls into that band. High impact is for the most sensitive systems where a compromise would have a severe or catastrophic effect. Low impact covers information where the effect would be limited, and there is a specific Low-Impact SaaS baseline for software as a service applications that hold minimal personal information, which reduces the documentation and control testing required. The level determines which NIST 800-53 control baseline applies, so a provider seeking a High authorization faces a considerably larger control set than one seeking Low. This tiering by impact is the same logic Australia uses when it maps controls to classification under the Information Security Manual.

How does FedRAMP authorization work?

A cloud service provider is assessed against the FedRAMP control baseline for its impact level by an accredited third party assessment organisation, produces the required security documentation, and is then authorised for government use. Once authorised, it moves into continuous monitoring rather than being reassessed from scratch each year.

The authorization paths are changing. Historically there were two: a Joint Authorization Board provisional authorization, backed by the CIOs of the major agencies, and an agency authorization granted by a single sponsoring agency. FedRAMP is modernising toward a single FedRAMP Authorized designation regardless of path, with the Joint Authorization Board replaced by a FedRAMP Board as the governance body and the program management office at the General Services Administration running day to day operations. For a provider, the practical takeaway is that the destination, a reusable authorization listed in the FedRAMP marketplace, matters more than the specific path, and the program is deliberately simplifying how a provider gets there.

What is FedRAMP 20x?

FedRAMP 20x is the current modernization initiative, announced in March 2025, that shifts the program away from point-in-time paperwork toward automation and continuous, machine-readable validation. It is the biggest change to how FedRAMP works in years.

The mechanism is a set of Key Security Indicators that can be validated automatically and continuously, rather than through large documentation packages assessed once. FedRAMP ran a Phase One pilot at Low impact through 2025 and began a Phase Two pilot at Moderate impact from late 2025, with the intention of opening these to the public and eventually retiring the older Revision 5 assessment path. The goal is authorizations that are faster and cheaper to obtain and that give agencies a live view of a provider’s security rather than an annual snapshot. For a provider weighing FedRAMP, 20x is the direction of travel, so it is worth designing for automated, evidence based validation rather than document heavy compliance.

How does FedRAMP compare to Australia’s IRAP?

Both FedRAMP and Australia’s IRAP exist to give government confidence in a cloud service, but they work differently in a way that matters to any provider operating in both markets. FedRAMP issues a reusable government authorization that other federal agencies can reuse, and lists authorised services in a public marketplace.

Australia’s IRAP does not work that way. An IRAP assessment produces an independent assessment of a system against the Information Security Manual, but it is not itself an authorization. The decision to authorise a system to operate rests with the individual Commonwealth entity that consumes it, based on the IRAP assessment and its own risk appetite. So there is no central authorised list in Australia equivalent to the FedRAMP marketplace, and an IRAP assessment for one agency does not automatically clear a system for another in the way a FedRAMP authorization can be reused. A US provider entering the Australian government market therefore cannot simply present its FedRAMP authorization, it needs an IRAP assessment against the ISM at the right classification. Cybernion helps cloud providers through that process with IRAP assessment and readiness.

Frequently asked questions

What is FedRAMP?

FedRAMP, the Federal Risk and Authorization Management Program, is a US government-wide program that standardises the security assessment, authorization and continuous monitoring of cloud products and services used by federal agencies. Its security requirements are based on NIST SP 800-53 controls, tailored for cloud. It was codified by the FedRAMP Authorization Act in December 2022, and it works on a do once, use many times model so one authorization can be reused across agencies.

What are the FedRAMP impact levels?

FedRAMP authorises cloud services at three impact levels, Low, Moderate and High, based on the FIPS 199 categorisation of the potential impact from a loss of confidentiality, integrity or availability. Moderate impact accounts for the large majority of authorizations. There is also a Low-Impact SaaS baseline for software as a service applications that hold minimal personal information, which reduces the documentation and testing burden.

How does FedRAMP authorization work?

A cloud service provider is assessed against the FedRAMP baseline for its impact level by an accredited third party assessment organisation, then authorised for government use. Historically there were two paths, a Joint Authorization Board provisional authorization and an agency authorization. FedRAMP is modernising toward a single FedRAMP Authorized designation, with the program office at the General Services Administration running operations and a FedRAMP Board providing governance.

What is FedRAMP 20x?

FedRAMP 20x is the current modernization initiative, announced in March 2025, that shifts FedRAMP toward automation, machine-readable validation and continuous monitoring rather than point-in-time paperwork. It uses Key Security Indicators and ran pilots at Low impact through 2025 and Moderate impact from late 2025. The aim is faster, cheaper authorizations that are validated continuously, and over time to retire the older assessment path.

How does FedRAMP compare to Australia’s IRAP?

Both authorise cloud services for government use, but the mechanism differs. FedRAMP issues a reusable government authorization that other US federal agencies can reuse, and lists authorised services in a marketplace. Australia’s IRAP produces an independent assessment of a system against the Information Security Manual, and the authorisation to operate decision rests with the individual Commonwealth entity, so there is no central authorised list equivalent to the FedRAMP marketplace.


Written by Gaurav Vikash, an ASD endorsed IRAP assessor and senior cyber security leader with 18 years of experience across Australia, the UK and Asia, including CISO and senior security leadership roles. He holds CISSP, CISA, CISM and CRISC and is an ISO 27001 Lead Auditor and ISO 42001 Lead Implementer, and speaks regularly at industry conferences.

Talk to us.

Sources:

  1. FedRAMP 20x, Federal Risk and Authorization Management Program, 2026
  2. Rev 5 Baselines Have Been Approved and Released, FedRAMP, 30 May 2023
  3. GSA announces FedRAMP 20x, General Services Administration, 24 March 2025
  4. Information Security Manual, Australian Signals Directorate, 2026

Last updated: 30 August, 2026

Talk to us about your engagement

A scoped proposal within one business day.