United States
What Is CMMC (Cybersecurity Maturity Model Certification)?
30 Aug 2026 · Updated 30 Aug 2026
CMMC is the US Department of Defense’s cybersecurity certification for its supply chain, protecting Federal Contract Information and Controlled Unclassified Information. It has three levels, with Level 2 built on the 110 requirements of NIST 800-171. It is being phased into defence contracts over roughly three years. Its nearest Australian counterparts are Defence Industry Security Program membership and IRAP assessment against the Information Security Manual.
CMMC is what a company has to hold to keep doing business with the US defence supply chain. For a company supplying defence in both the US and Australia, the two countries gate that work very differently, and confusing them is a costly mistake.
What is CMMC?
CMMC, the Cybersecurity Maturity Model Certification, is a US Department of Defense program that verifies its contractors and subcontractors protect sensitive information. It applies to the Defense Industrial Base, the network of companies that supply the US military, and it covers two categories of information: Federal Contract Information and Controlled Unclassified Information.
The purpose is supply chain assurance. Defence information is only as secure as the least secure contractor that holds it, so CMMC requires contractors to demonstrate a defined level of cyber security maturity as a condition of being awarded relevant contracts. Depending on the level, that demonstration is either a self-assessment or an independent certification. This makes CMMC different from a voluntary framework: it is a gate on contract eligibility, so for a defence supplier it is not optional if they want the work. The Australian equivalent gate for defence suppliers is Defence Industry Security Program membership, which works differently but plays a similar role.
What are the three CMMC levels?
CMMC has three levels, and the level required depends on the sensitivity of the information a contract involves. Each level sets both a control set and a verification method.
| Level | Protects | Requirements | Verification |
|---|---|---|---|
| Level 1 Foundational | Federal Contract Information | 15 basic safeguarding requirements | Annual self-assessment |
| Level 2 Advanced | Controlled Unclassified Information | The 110 requirements of NIST SP 800-171 | Self-assessment or third party certification |
| Level 3 Expert | The most sensitive Controlled Unclassified Information | Level 2 plus selected NIST SP 800-172 requirements | Government assessment |
The progression matters for who checks the work. At Level 1, a contractor attests to its own compliance. At Level 2, higher risk contracts require an assessment by an accredited third party assessment organisation rather than self-attestation. At Level 3, the government itself assesses, through the Defense Industrial Base Cybersecurity Assessment Center. So the level determines not just how much must be done, but how independently it is verified.
How does CMMC relate to NIST 800-171?
CMMC Level 2 is built directly on NIST SP 800-171, the US standard for protecting Controlled Unclassified Information in non-federal systems. It requires all 110 of the standard’s security requirements, so in practice, meeting CMMC Level 2 means implementing NIST 800-171 in full.
There is a version nuance worth knowing. CMMC is currently pinned to Revision 2 of NIST 800-171. NIST published Revision 3 in May 2024, but the Department of Defense has deliberately kept CMMC assessments on Revision 2 for now, and will move to Revision 3 through future rulemaking rather than automatically. So a contractor preparing for CMMC should implement Revision 2 unless and until the rules change. Level 3 goes further, adding selected enhanced requirements from NIST SP 800-172, which is designed to protect against advanced persistent threats. How this control set compares to the Australian baseline is covered in NIST 800-171 vs the Essential Eight.
When does CMMC take effect?
CMMC is being introduced in stages rather than all at once. The CMMC Program rule, which sets up the model and the assessment ecosystem, took effect in December 2024. The acquisition rule that actually puts CMMC requirements into defence contracts took effect in November 2025.
From there, implementation is phased over roughly three years, with CMMC requirements added to solicitations in stages, beginning with self-assessment and building up to third party and government assessment as the phases progress. The exact phase timelines have been adjusted during the rollout, which is common for a program of this scale, so a contractor should check the current schedule rather than rely on an older plan. The practical point is that CMMC is no longer a future prospect, it is live and appearing in contracts, so a defence supplier that has not yet implemented NIST 800-171 is already behind. The clauses that carry the obligation into contracts are the DFARS cybersecurity clauses, which a supplier will see in its defence agreements.
Does CMMC apply to Australian companies, and how does it compare to IRAP?
CMMC applies to companies in the US defence supply chain, so an Australian company needs it only if it is a contractor or subcontractor to the US Department of Defense handling Federal Contract Information or Controlled Unclassified Information. It is not an Australian requirement, and it does not apply to Australian government work.
For Australian defence and government work, the mechanisms are different. The gate for defence suppliers is Defence Industry Security Program membership, and systems holding government information are assessed against the Information Security Manual through an IRAP assessment. The key structural difference is that CMMC produces a pass or fail certification tied to contract eligibility, whereas an IRAP assessment produces an independent report that the consuming agency uses to make its own authorisation decision. In that sense the Defence Industry Security Program is closer in function to CMMC than IRAP is, because both are membership or certification gates on defence work. A company operating in both defence markets needs to treat them as separate regimes: CMMC for the US, and DISP plus IRAP for Australia. For an Australian or international company working out the Australian side, Cybernion helps through IRAP assessment and the Essential Eight baseline.
Frequently asked questions
What is CMMC?
CMMC, the Cybersecurity Maturity Model Certification, is a US Department of Defense program that verifies defence contractors and subcontractors protect sensitive information. It applies to the Defense Industrial Base and covers Federal Contract Information and Controlled Unclassified Information. Contractors must demonstrate the required cyber security maturity, through self-assessment or third party certification depending on the level, as a condition of being awarded relevant defence contracts.
What are the three CMMC levels?
CMMC has three levels. Level 1 Foundational protects Federal Contract Information using 15 basic safeguarding requirements, verified by annual self-assessment. Level 2 Advanced protects Controlled Unclassified Information against the 110 requirements of NIST SP 800-171, verified by self-assessment or by a certified third party assessment organisation depending on the contract. Level 3 Expert adds selected NIST SP 800-172 requirements and is assessed by the government.
How does CMMC relate to NIST 800-171?
CMMC Level 2 is built directly on NIST SP 800-171, requiring all 110 of its security requirements, and CMMC is currently pinned to Revision 2 of that standard. NIST published Revision 3 of SP 800-171 in May 2024, but the Department of Defense has kept CMMC assessments on Revision 2 for now and will move to Revision 3 through future rulemaking. Level 3 adds enhanced requirements drawn from NIST SP 800-172.
When does CMMC take effect?
The CMMC Program rule took effect in December 2024, and the acquisition rule that puts CMMC requirements into defence contracts took effect in November 2025. Implementation is phased over roughly three years, adding CMMC requirements to solicitations in stages, starting with self-assessment and building up to third party and government assessment. The exact phase timelines have been adjusted during rollout, so contractors should check the current schedule.
Does CMMC apply to Australian companies?
CMMC applies to companies in the US defence supply chain, so an Australian company needs it only if it is a contractor or subcontractor to the US Department of Defense handling Federal Contract Information or Controlled Unclassified Information. For Australian defence work, the equivalent gate is Defence Industry Security Program membership, and systems are assessed against the Information Security Manual through IRAP rather than certified under CMMC.
Written by Gaurav Vikash, an ASD endorsed IRAP assessor and senior cyber security leader with 18 years of experience across Australia, the UK and Asia, including CISO and senior security leadership roles. He holds CISSP, CISA, CISM and CRISC and is an ISO 27001 Lead Auditor and ISO 42001 Lead Implementer, and speaks regularly at industry conferences.
Sources:
- Cybersecurity Maturity Model Certification (CMMC) Program final rule, Federal Register, 15 October 2024
- DFARS: Assessing Contractor Implementation of Cybersecurity Requirements, Federal Register, 10 September 2025
- NIST SP 800-171 Revision 3, National Institute of Standards and Technology, 14 May 2024
- Information Security Manual, Australian Signals Directorate, 2026
Last updated: 30 August, 2026
