PSPF
PSPF Business Impact Levels and How They Set Classification
3 July 2026 · Updated 3 July 2026
A PSPF Business Impact Level (BIL) rates the damage that would be expected if information were compromised. For classification, the originator judges the damage to national interest, organisations or individuals from a loss of confidentiality, and that judgement sets the security classification, from OFFICIAL Sensitive through PROTECTED, SECRET and TOP SECRET.
Classification is not a label someone picks by feel. Under the PSPF it is the output of a damage assessment, and the Business Impact Level is the instrument that assessment runs on. Get the BIL wrong and every control downstream, the ISM controls, the clearances, the hosting, is scoped to the wrong level.
What is a PSPF Business Impact Level (BIL)?
A PSPF Business Impact Level (BIL) is a rating of the damage that would be expected if the confidentiality, integrity or availability of information were compromised. When the question is classification, the relevant impact is confidentiality: how much damage a compromise of the information’s confidentiality would cause to the national interest, to organisations or to individuals.
The BIL tool gives originators a consistent way to make that judgement. It sets out indicative examples of damage, across areas such as national security, government operations, the economy, personal safety and law enforcement, so that two people assessing the same information reach a comparable answer. The point of a shared scale is collaboration. When one entity shares information with another, a common measure of impact lets both sides agree the controls that should apply. The BIL is the reasoning step. The security classification is the label that reasoning produces.
How does a Business Impact Level set the PSPF security classification?
The BIL sets the classification by mapping the assessed damage to a classification level. The originator judges the likely damage from a compromise of confidentiality, then reads that damage against the classification thresholds.
| Assessed damage from compromise | PSPF classification |
|---|---|
| No or insignificant damage | OFFICIAL |
| Limited damage to an individual, organisation or government | OFFICIAL: Sensitive |
| Damage to the national interest, organisations or individuals | PROTECTED |
| Serious damage to the national interest, organisations or individuals | SECRET |
| Exceptionally grave damage to the national interest, organisations or individuals | TOP SECRET |
The words carry weight. Damage, serious damage and exceptionally grave damage are the actual thresholds that separate PROTECTED, SECRET and TOP SECRET. OFFICIAL: Sensitive is not a security classification in the strict sense; it is a marking for information needing limited additional handling where compromise would cause limited damage. The BIL tool’s job is to make the choice between these defensible rather than arbitrary.
What are the current PSPF security classifications?
The current PSPF classifications are OFFICIAL, OFFICIAL: Sensitive, PROTECTED, SECRET and TOP SECRET. UNOFFICIAL is used for information with no government business value. PROTECTED, SECRET and TOP SECRET are the security classifications that require a suitably cleared holder and progressively tighter controls.
One thing to watch: the older CONFIDENTIAL classification was retired in the reform that introduced OFFICIAL: Sensitive, so any BIL guidance that still maps a level to CONFIDENTIAL is out of date. Alongside the classification, information can carry information management markers and caveats such as Personal Privacy, Legal Privilege, Legislative Secrecy and National Cabinet, which add handling rules without changing the classification itself. For how these classifications drive an assessment, see government information classifications and IRAP.
Who assigns the Business Impact Level and classification under the PSPF?
The originator of the information assigns both. Only the originator can set or change the sensitivity or security classification of its information, using the BIL tool to judge the likely damage from a compromise. This matters because it means classification travels with the information from its source, not from whoever holds it later.
At the point of classification the originator also sets a declassification date or event, based on an assessment of how long the information could cause damage if compromised. That stops classification persisting past the point where the risk has faded, which keeps handling costs proportionate. For a supplier or a downstream entity, the practical rule is that it does not reclassify information it receives; it handles the information at the marking the originator applied, and confirms that marking with the owning entity before scoping any system that will hold it.
Why do PSPF Business Impact Levels matter for suppliers handling Commonwealth data?
Because the classification a BIL produces sets every control that follows. The classification of the data a system holds decides which ISM controls apply, the clearances the people handling it need, and the level an IRAP assessment has to be run at. A system holding PROTECTED data must meet the PROTECTED control set; the same system holding only OFFICIAL: Sensitive data has a much lighter obligation.
That is why confirming classification comes first. Scope a system against the wrong classification and the result is either over-building and wasted money or under-building and a failed assessment. The owning entity holds the authoritative classification because its originators applied it, so the starting move for any supplier is to get that classification in writing before designing controls or booking an assessment. How far these obligations reach into a supplier’s business is covered in does the PSPF apply to my business. The relationship between the PSPF and the technical control set is explained in PSPF vs ISM, and the framework overall in what is the PSPF.
For an organisation that needs a system scoped and assessed at the right classification, Cybernion provides IRAP assessment and readiness.
Frequently asked questions
What is a PSPF Business Impact Level (BIL)?
A PSPF Business Impact Level (BIL) is a rating of the damage that would be expected if the confidentiality, integrity or availability of information were compromised. For classification, the originator assesses the damage to national interest, organisations or individuals from a compromise of confidentiality, and that damage judgement decides whether the information needs a security classification and which one.
How does a Business Impact Level set the PSPF security classification?
The originator uses the BIL tool to judge the damage from a compromise of confidentiality, then maps that damage to a classification. Limited damage to an individual, organisation or government points to OFFICIAL Sensitive. Damage to the national interest points to PROTECTED. Serious damage points to SECRET. Exceptionally grave damage points to TOP SECRET. Information with no or insignificant confidentiality damage is OFFICIAL.
What are the current PSPF security classifications?
The current PSPF classifications are OFFICIAL, OFFICIAL Sensitive, PROTECTED, SECRET and TOP SECRET, with UNOFFICIAL used for information with no government business value. PROTECTED, SECRET and TOP SECRET are security classifications requiring a cleared holder. The older CONFIDENTIAL classification was retired, so current guidance uses only these levels.
Who assigns the Business Impact Level and classification under the PSPF?
The originator of the information assigns it. Only the originator can set or change the sensitivity or security classification, using the BIL tool to judge the likely damage from compromise. At classification the originator also sets a declassification date or event based on how long the information could cause damage, so classification does not persist longer than the risk.
Why do Business Impact Levels matter for suppliers handling Commonwealth data?
The BIL and resulting classification set every control that follows. The classification of the data a system holds decides which ISM controls apply and the IRAP assessment level required. Where a system handles data classified at PROTECTED, it must meet the PROTECTED control set, so confirming the classification with the owning entity is the first step before any assessment or hosting decision.
Written by Gaurav Vikash, an ASD endorsed IRAP assessor and senior cyber security leader with 18 years of experience across Australia, the UK and Asia, including CISO and senior security leadership roles. He holds CISSP, CISA, CISM and CRISC and is an ISO 27001 Lead Auditor and ISO 42001 Lead Implementer, and speaks regularly at industry conferences.
Sources:
- Policy 8: Sensitive and security classified information, Department of Home Affairs, 2026
- Identifying sensitive and security classified information for the Australian Government, Microsoft Learn, June 2025
- Security classifications and protective markings, Australian Government Style Manual, 2026
- Protective Security Policy Framework, Department of Home Affairs, July 2026
Last updated: 3 July, 2026
