The System Security Plan (SSP) describes the system, its architecture, data, users and security arrangements. Its annex, the SSP-A, maps every applicable Information Security Manual (ISM) control to how it has been implemented, or why it does not apply. The system owner owns both, IRAP assessors cannot write them, and the assessment control matrix produced under IRAP is derived from the SSP annex template.
The first document read under IRAP is the System Security Plan. It tells the assessment what the system is and what the owner claims about it, and its annex is the control level map the whole assessment runs against.
What is a System Security Plan?
The System Security Plan, or SSP, is the core description of the system for security purposes. It sets out the system’s function, architecture, the data it handles and its classification, the users, the technology stack and the security arrangements around it. It is one of the documents requested under IRAP during the plan and prepare stage and one of the artefacts named in the authorisation package.
The SSP is not a marketing description or a network diagram on its own. It is the reference the assessment uses to understand the system before testing anything, and the reference an authorising officer returns to when weighing the residual risk. If the SSP is vague, the assessment slows down while that understanding is reconstructed from what the document should have provided. For the full process context, see the complete guide to IRAP assessment and the wider set of IRAP documents needed.
What goes in the SSP annex?
The annex, usually written SSP-A, is where the control detail lives. For each ISM control that applies to the system’s classification, the annex records how the control is implemented, or a justification for why it does not apply. It is the control by control claim brought to the assessment.
The annex is structured around the same ISM control set the assessment works from, so each control carries its identifier, its applicability, and the owner’s implementation statement. Building the annex around the controls applicable to the data classification, rather than the whole framework library, keeps it proportionate. The annex is also the basis used under IRAP when defining the assessment boundary, because it identifies which controls apply to the system in scope.
The ISM control set moves each quarter, so the annex has to move with it. The ISM September 2026 changes added 44 controls, and ASD also refreshed the SSP annex template itself. To see which new controls land inside a given scope and generate a scoped SSP-A against the current ISM, use Cybernion Local, the free browser based ISM tool.
Who owns the SSP and the annex?
The system owner. This is not a soft ownership point, it is an independence requirement. IRAP assessors cannot draft the system documentation, conduct an initial gap assessment or make design recommendations and then assess the same system, because doing so would compromise the independence IRAP is built on. Assessors who wrote the SSP would be assessing their own work.
So the SSP and annex are the owner’s to produce, accurately and approved by the relevant authority, before the assessment starts. Readiness support that stops short of drafting the documentation for the assessment is a separate service from the assessment itself, which is why IRAP readiness and the assessment are kept distinct.
How does the SSP annex relate to the control matrix?
The two are close cousins, and the distinction matters. The assessment control matrix produced under IRAP is a derivative of the SSP annex template. The table sets them side by side.
| SSP annex (SSP-A) | Assessment control matrix | |
|---|---|---|
| Who produces it | The system owner | IRAP assessors |
| What it records | How the owner says each control is implemented | The assessed outcome for each control after testing |
| Nature | The owner’s claim | The assessed result |
| Status per control | Implemented, or not applicable with justification | Effective, ineffective, alternate control, not implemented, no visibility or not applicable |
The annex is the owner’s starting position; the control matrix is what the assessment produces once each claim has been examined, interviewed and tested. A well built annex makes the matrix faster to complete, because the assessment is confirming a clear claim rather than working out what the owner meant.
When should the SSP be ready for an assessment?
Have the SSP and annex accurate and approved before the assessment starts. They are named among the documents requested under IRAP, and the consumer guidance lists preparing system documentation as a recommended step for a smooth assessment. Keeping them current between assessments matters too, because a plan that has drifted through months of change is not a credible basis for ongoing authorisation. The SSP feeds directly into the Continuous Monitoring Plan the authorising officer also expects, and both form part of a package the IRAP Common Assessment Framework defines stage by stage.
For help preparing an SSP and annex that will stand up to assessment, we provide IRAP readiness and the full IRAP assessment service.
Frequently asked questions
What is a System Security Plan in an IRAP assessment?
The System Security Plan, or SSP, is the document that describes the system, its architecture, data, users and security arrangements. It is at the centre of the authorisation package and is one of the first documents requested under IRAP when planning an assessment.
What is the SSP annex?
The SSP annex, often written SSP-A, is the control by control mapping. For each applicable ISM control it records how the control is implemented in the system, or why it does not apply. The assessment control matrix produced under IRAP is a derivative of the SSP annex template.
Who owns the System Security Plan?
The system owner owns the SSP and its annex. IRAP assessors cannot write them, because assessors who drafted the system documentation would lose the independence IRAP requires. The assessment reads and tests what the owner has documented.
How does the SSP relate to the control matrix?
The assessment control matrix is derived from the SSP annex template. The annex states how the owner says each control is implemented; the control matrix records the assessed outcome for each control after testing. The annex is the owner’s claim, the matrix is the assessed result.
When do we need the SSP ready?
Before the assessment begins. The SSP and annex are named among the documents requested under IRAP during planning, and preparing them accurately and having them approved by the relevant authority is one of the recommended steps to allow for a smooth assessment.
Written by Gaurav Vikash, an ASD endorsed IRAP assessor and senior cyber security leader with 18 years of experience across Australia, the UK and Asia, including CISO and senior security leadership roles. He holds CISSP, CISA, CISM and CRISC and is an ISO 27001 Lead Auditor and ISO 42001 Lead Implementer, and speaks regularly at industry conferences.
Sources:
- IRAP Consumer Guide, Australian Signals Directorate, July 2025
- IRAP Common Assessment Framework, Australian Signals Directorate, April 2025
- Information Security Manual, cyber.gov.au, June 2026
- Infosec Registered Assessors Program (IRAP), cyber.gov.au, 2026
Last updated: 5 September, 2026
