Cybernion
← Insights

ISO 9001

Integrating ISO 9001, 27001 and 22301 Into One System

3 July 2026 · Updated 3 July 2026

An integrated management system (IMS) runs ISO 9001, ISO 27001 and ISO 22301 through one shared framework instead of three. It works because all three follow the Annex SL harmonised structure, so clauses 4 to 10 share near identical text. The common clauses are documented once, the object specific parts kept separate, and all audited together.

Most organisations that hold several ISO certificates built each one in isolation, then discovered they were maintaining three copies of the same context analysis and three internal audit programmes. Integration undoes that. The saving is real, but only when it is clear what actually overlaps and what does not.

What is an integrated management system under ISO standards?

An integrated management system (IMS) is one management framework that satisfies more than one ISO management system standard at the same time. Instead of a separate quality manual, security manual and continuity manual, an organisation runs a single system where the shared requirements are defined once and the standard specific requirements are added where needed. For ISO 9001, ISO 27001 and ISO 22301 that means one context analysis, one leadership structure, one internal audit programme, one management review and one improvement process serve all three. It is possible because ISO deliberately built these standards on a common skeleton. The point is not to blur quality, security and continuity into mush, but to stop duplicating the management plumbing that all three need. Done well, an IMS is easier to run and cheaper to audit than three parallel systems.

Why can ISO 9001, 27001 and 22301 be integrated?

They can be integrated because all three follow the Annex SL harmonised structure, the common ten clause template ISO applies to its management system standards. Clauses 4 to 10 carry identical or near identical core text across ISO 9001 for quality, ISO 27001 for information security and ISO 22301 for business continuity. Context of the organisation, leadership, planning, support, performance evaluation and improvement mean the same thing in each. That is not a coincidence. ISO rewrote the harmonised structure in the 2021 ISO/IEC Directives specifically so organisations could integrate management systems rather than maintain silos. The shared clauses give the integration surface. Where the standards diverge is the object each protects and the operation clause where the real work happens, so integration is a matter of sharing the common spine and keeping the specifics distinct.

Which clauses are shared and which are standard specific?

Clauses 4 to 7, 9 and 10 are largely shared; clause 8, operation, is where each standard goes its own way. The context, leadership, planning, support, performance evaluation and improvement clauses share core text, so they are written and audited once. Clause 8 is different: ISO 9001 covers product and service delivery, ISO 27001 covers the risk assessment and Annex A controls, and ISO 22301 covers business impact analysis, continuity strategies and plans. Objectives, risk registers and some documents also stay standard specific because a quality objective is not a security objective.

Clause Shared or specific Notes
4 Context Shared One context and interested party analysis for all three
5 Leadership Shared One leadership commitment and policy structure
6 Planning Shared structure Objectives and risks stay standard specific
7 Support Shared Resources, competence, awareness, documented information
8 Operation Specific Quality delivery, ISMS controls, continuity plans differ
9 Performance evaluation Shared One internal audit programme and management review
10 Improvement Shared One corrective action and improvement process

How is an integrated management system built across ISO standards?

Start from the shared clauses and add the specifics. Define one scope statement that names all three standards and the boundaries of each, then run a single context and interested party analysis under clause 4. Build one leadership structure and an integrated policy set under clause 5. Under clause 6, keep planning common but hold separate objectives and risk treatment for quality, security and continuity. Share support entirely under clause 7. Keep clause 8 operation split by standard, since the ISMS risk assessment, quality delivery and continuity planning are distinct work. Run one internal audit programme and one management review under clause 9, and one corrective action process under clause 10. The mandatory documents each standard requires still have to exist, but the management framework holding them is single. Build the common layer first, then bolt on the standard specific pieces. The ISO 9001 clauses explained and ISO 22301 clauses explained guides set out what each standard specific layer requires.

What are the benefits and risks of an integrated management system?

The benefit is less duplication: one audit programme, one management review, combined certification audits and a single team running the system. A certification body can assess all three standards in one combined visit against shared documentation, cutting audit days and cost. The risk is over integration. If everything is flattened into one document set, the specific rigour each standard needs can be lost. A security risk assessment is not a quality risk register, and a continuity business impact analysis has no ISO 9001 equivalent. Blur them and an auditor raises nonconformities against the standard whose requirement got diluted. The discipline is to share the management plumbing and keep the object specific work distinct and traceable. An organisation also still holds a separate certificate per standard; integration is about the system and audits, not a single badge. Scoped well, an IMS is meaningfully lighter to run. If certification is the destination, Cybernion’s ISO 27001 service covers the information security component.

Frequently asked questions

What is an integrated management system under ISO standards?

An integrated management system, or IMS, runs two or more ISO management system standards, such as ISO 9001, ISO 27001 and ISO 22301, through one shared framework. Because they use the Annex SL clause 4 to 10 structure, the common clauses are documented, audited and reviewed once rather than separately for each standard.

Why can ISO 9001, 27001 and 22301 be integrated?

All three follow the Annex SL harmonised structure, so clauses 4 to 10 share near identical core text on context, leadership, planning, support, performance evaluation and improvement. Only the object specific requirements differ, which lets an organisation keep one management system with standard specific parts bolted on.

Do you get one certificate for an integrated management system?

No, a separate certificate is held for each standard, because each has its own scope and requirements. What is integrated is the underlying management system and the audits. A single certification body can assess all three in one combined audit against one set of shared documentation.

Which clauses are shared across ISO 9001, 27001 and 22301?

Clauses 4 to 10 are shared in structure across all three: context of the organisation, leadership, planning, support, operation, performance evaluation and improvement. Clause 8, operation, is where each standard diverges most, since quality, security and continuity run different processes there.


Written by Gaurav Vikash, an ASD endorsed IRAP assessor and senior cyber security leader with 18 years of experience across Australia, the UK and Asia, including CISO and senior security leadership roles. He holds CISSP, CISA, CISM and CRISC and is an ISO 27001 Lead Auditor and ISO 42001 Lead Implementer, and speaks regularly at industry conferences.

Talk to us.

Sources:

  1. Annex SL harmonised structure, ISO/IEC Directives Part 1, ISO, 2021 edition
  2. ISO 9001:2015 Quality management systems, Requirements, ISO, edition 5, 2015
  3. ISO/IEC 27001:2022 Information security management systems, Requirements, ISO, 2022
  4. ISO 22301:2019 Security and resilience, Business continuity management systems, Requirements, ISO, 2019

Last updated: 3 July, 2026

Talk to us about your engagement

A scoped proposal within one business day.