ISO 22301
ISO 22301 Clauses Explained: Clauses 4 to 10 in Plain English
3 July 2026 · Updated 3 July 2026
ISO 22301 has ten clauses, but the requirements an organisation is certified against live in clauses 4 to 10: context, leadership, planning, support, operation, performance evaluation and improvement. Clauses 1 to 3 are scope and definitions. Clause 8 holds the core continuity work, including the business impact analysis and plans.
Auditors do not grade the continuity plan first. They start with clause 4 and work through to clause 10, because that is where the requirements are. Knowing what each clause asks for is the difference between passing and rewriting.
How are the ISO 22301 clauses structured?
ISO 22301 is built on the Annex SL high level structure, the shared ten clause layout ISO uses across its management system standards. The first three clauses are administrative. Clauses 4 to 10 carry the auditable requirements and follow a Plan, Do, Check, Act cycle.
| Clause | Title | Phase | Focus |
|---|---|---|---|
| 4 | Context | Plan | Organisation, interested parties, BCMS scope |
| 5 | Leadership | Plan | Commitment, policy, roles |
| 6 | Planning | Plan | Risks and opportunities, continuity objectives |
| 7 | Support | Plan | Resources, competence, communication, documents |
| 8 | Operation | Do | BIA, risk assessment, strategies, plans, exercises |
| 9 | Performance evaluation | Check | Monitoring, internal audit, management review |
| 10 | Improvement | Act | Nonconformity, corrective action, continual improvement |
Because this is the same structure used by ISO 27001 and ISO 9001, anyone who has implemented one of those recognises the structure immediately. For the full overview of what ISO 22301 certifies, see what ISO 22301 is. The differences we cover below are in the content of each clause, not the skeleton. For the full comparison, see ISO 22301 versus ISO 27001.
What do ISO 22301 clauses 4 and 5 require?
Clauses 4 and 5 set the foundation: what the business continuity management system covers and who owns it. Clause 4, context, requires the organisation to understand itself, identify interested parties and their continuity requirements, and define a clear BCMS scope. Scope is where many implementations go wrong, either too broad to manage or so narrow it excludes activities that matter.
Clause 5, leadership, puts accountability on top management. They must show commitment, establish a business continuity policy, and assign the roles and responsibilities that run the system. This is not a formality, because an auditor will look for evidence that leaders actually drive continuity, resource it and hold people to it, not that they signed a policy once. If continuity has no owner with authority, clause 5 is not met, and the rest of the system tends to drift because nobody is accountable for keeping it alive.
What do ISO 22301 clauses 6 and 7 require?
Clauses 6 and 7 turn direction into a plan and the means to run it. Clause 6, planning, requires the organisation to address the risks and opportunities that affect the BCMS, set continuity objectives that are measurable and consistent with the policy, and plan how it will achieve them. The 2024 amendment to ISO 22301 added explicit consideration of climate change to the context and planning requirements, so it belongs here.
Clause 7, support, is the resourcing clause. It requires the people, competence, awareness, communication and documented information the system needs to function. In practice this means trained staff who know their continuity roles, defined internal and external communication for a disruption, and controlled documentation that people can find and trust in a crisis. Weak clause 7 evidence is a common finding, because organisations write plans but never resource the competence and communication that make them usable when it matters.
What does ISO 22301 clause 8 require?
Clause 8, operation, is the core of ISO 22301 and where the real continuity work lives. It requires the business impact analysis and risk assessment, the selection of business continuity strategies and solutions, the documented business continuity plans and response procedures, and the exercising and testing that proves they work.
This is the clause that produces the recovery objectives, the plans people follow during an incident, and the evidence that those plans have been rehearsed. It runs in a logical order: analyse impact, assess risk, choose strategies, write plans, then exercise them and record the results. Each part depends on the one before, so a weak business impact analysis undermines everything after it. Our business impact analysis guide covers the first and most important step. Clause 8 is the largest clause in the standard, and where most audit time is spent, because it is where continuity is either real or theoretical.
What do ISO 22301 clauses 9 and 10 require?
Clauses 9 and 10 close the loop by checking the system works and improving it. Clause 9, performance evaluation, requires the organisation to monitor and measure continuity performance, run internal audits of the BCMS, and hold management reviews where leadership assesses whether the system is effective and still fit for the organisation.
Clause 10, improvement, requires the organisation to handle nonconformities when they arise, take corrective action to stop them recurring, and continually improve the BCMS. Together these two clauses are what make ISO 22301 a management system rather than a one off project. Without them, a business continuity management system ages silently: plans go stale, contacts change, dependencies shift, and nobody notices until an incident exposes it. The check and act clauses force the organisation to keep testing its own assumptions and to act on what it finds. They are also where auditors look for evidence that continuity is actively maintained, not just built once and shelved. For an organisation pursuing certification, Cybernion’s ISO 27001 and management systems service covers the audit and certification pathway.
Frequently asked questions
How many clauses are there in ISO 22301?
ISO 22301 has ten clauses. Clauses 1 to 3 cover scope, normative references and terms, and hold no auditable requirements. The certifiable requirements live in clauses 4 to 10, covering context, leadership, planning, support, operation, performance evaluation and improvement.
Which ISO 22301 clause covers the business impact analysis?
Clause 8, operation, covers the business impact analysis, along with risk assessment, business continuity strategies and solutions, business continuity plans, and exercising and testing. It is the largest and most technical clause and holds the core continuity work the rest of the standard supports.
Are all ISO 22301 clauses mandatory?
Clauses 4 to 10 are all mandatory for certification. Unlike ISO 27001, ISO 22301 has no annex of optional controls to select from, so requirements cannot be excluded. What scales to the organisation is the depth of implementation, not which clauses apply.
What is the difference between ISO 22301 clauses and ISO 27001 clauses?
The clause skeleton is identical, because both use the Annex SL high level structure with the same clauses 4 to 10. The difference is the content within each. ISO 22301 clause 8 covers business impact analysis and continuity planning, while ISO 27001 clause 8 covers information security risk treatment and its Annex A controls.
Does ISO 22301 have an Annex A like ISO 27001?
No. ISO 22301 has no fixed control catalogue. Where ISO 27001 provides Annex A with 93 controls to select from, ISO 22301 states the continuity outcomes an organisation must achieve and leaves the specific measures to it, justified by its business impact analysis and risk assessment.
Written by Gaurav Vikash, an ASD endorsed IRAP assessor and senior cyber security leader with 18 years of experience across Australia, the UK and Asia, including CISO and senior security leadership roles. He holds CISSP, CISA, CISM and CRISC and is an ISO 27001 Lead Auditor and ISO 42001 Lead Implementer, and speaks regularly at industry conferences.
Sources:
- ISO 22301:2019 Security and resilience, Business continuity management systems, Requirements, ISO, published October 2019
- ISO 22301:2019/Amd 1:2024 Climate action changes, ISO, 2024
- ISO 22313:2020 Guidance on the use of ISO 22301, ISO, 2020
Last updated: 3 July, 2026
