Cybernion
← Insights

Security

Cyber Security for Mining and Resources Explained

30 Aug 2026 · Updated 30 Aug 2026

Mining and resources firms run extensive operational technology, hold valuable exploration and geological data, and can be caught by critical infrastructure law depending on their assets. The distinctive risk is operational technology, where an attack can disrupt production or affect safety, not just data. Securing both the IT and OT environments, with the Essential Eight and ISO 27001 for IT and standards like IEC 62443 for OT, is the core of mining cyber security.

Mining is where cyber risk meets heavy industry. The data matters, but the bigger difference from most sectors is operational technology, the systems that run physical processes, where a cyber attack can stop production or endanger people.

Why are mining and resources companies a target for cyber attacks?

Mining and resources firms combine three things attackers value. They hold valuable intellectual property, exploration data, geological surveys and resource estimates, which is commercially valuable to competitors and strategically valuable to state actors. They run extensive operational technology that controls physical extraction and processing. And they operate at large scale, often across remote sites, which creates a wide and distributed attack surface.

The consequences of an attack are also unusually severe. Because operational technology controls physical equipment and processes, an attack can halt production, damage equipment, or create safety hazards for workers, which raises the stakes well beyond data loss. And the scale of mining means downtime is extraordinarily expensive, a halted operation can cost enormous sums per day, which makes the sector an attractive ransomware target. The combination of valuable data, physical operations and the high cost of disruption is why mining and resources is treated as a high risk sector, and why its cyber security has to address the physical, operational side as much as the data side.

What is the operational technology risk in mining?

Operational technology, or OT, is the distinct and defining cyber risk in mining. OT is the control systems and industrial equipment that run extraction, processing and site operations, and it differs from ordinary IT in a fundamental way: an attack on OT can have physical consequences, halting production, damaging equipment or creating safety hazards, because it controls real world processes rather than just information.

Several factors make OT hard to secure. It is often older technology with long lifecycles, designed for reliability rather than security, and difficult to patch because taking it offline disrupts production. Historically OT was isolated, but it is increasingly connected to corporate IT networks for efficiency and monitoring, which creates pathways an attacker can use to move from the corporate network into the operational environment. This convergence of IT and OT is where much of the modern risk lies. Securing mining therefore means protecting the IT and OT environments together, with particular attention to the boundary between them, because a breach of the corporate network that reaches OT is the scenario with the most serious potential consequences. IT security frameworks alone do not fully address OT, which is why the sector uses dedicated OT security standards as well.

What obligations do mining and resources companies have?

A mining or resources firm that meets the turnover threshold is covered by the Privacy Act and the Notifiable Data Breaches scheme for the personal information it holds, such as employee data. That baseline applies as it does to any large business.

The more significant question for the sector is critical infrastructure law. Mining is not itself one of the eleven critical infrastructure sectors under the Security of Critical Infrastructure Act, but a resources company can be caught by the Act if it owns or operates assets that fall within a covered sector, most relevantly certain energy assets. Whether the Act applies turns on the specific assets a company operates and whether they meet the definitions and thresholds for a critical infrastructure asset. So a resources company should assess its asset portfolio against the Act rather than assume it is entirely in or out, because a large diversified operator may hold some assets that are caught and many that are not. Where the Act does apply, it brings obligations including a risk management program and cyber incident reporting for the captured assets.

What frameworks should mining use, and where should it start?

Mining and resources firms need to cover both sides of their environment. For corporate IT, the Essential Eight and ISO 27001 are the right frameworks, as they are for most organisations. For operational technology, dedicated OT security standards such as IEC 62443 are used, because IT frameworks do not fully address the different requirements of industrial control systems. Where the Security of Critical Infrastructure Act applies to particular assets, its risk management program requirements apply on top.

On where to start, the priorities reflect the OT risk. Segmentation between IT and OT is foundational, so that a breach of the corporate network cannot reach the operational environment, and it is often the single highest value control in the sector. Strong access control, particularly for remote and privileged access to OT, and monitoring across both environments follow. Anchor the corporate side to the Essential Eight, address OT with an appropriate OT security program, and, for any critical infrastructure assets, meet the SOCI obligations. The mistake to avoid is securing the corporate IT while leaving OT under-addressed, because OT is where the most severe consequences lie. For an organisation that wants help across both its IT and critical infrastructure obligations, Cybernion helps through Essential Eight, ISO 27001 and critical infrastructure advisory.

Frequently asked questions

Why are mining and resources companies a target for cyber attacks?

Mining and resources firms combine valuable intellectual property, such as exploration and geological data, with extensive operational technology that runs physical processes, and often large, remote operations. That makes them attractive both to attackers seeking commercially or strategically valuable data and to those aiming to disrupt production. Because operational technology controls physical equipment, an attack can affect safety and production, not just data.

What is the operational technology risk in mining?

Operational technology, the control systems and industrial equipment that run mining and processing, is a distinct and serious risk. Unlike ordinary IT, an attack on operational technology can halt production, damage equipment or create safety hazards, because it controls physical processes. Operational technology is often older, hard to patch, and increasingly connected to corporate networks, which widens the attack surface. Securing the IT and OT environments together is central to mining cyber security.

Are mining companies covered by the SOCI Act?

It depends on the assets they operate. Mining is not itself one of the eleven critical infrastructure sectors, but a resources company can be caught by the Security of Critical Infrastructure Act if it owns or operates assets that fall within a covered sector, such as certain energy assets. Whether the Act applies turns on the specific assets and thresholds, so a resources company should assess its asset portfolio against the Act rather than assume it is in or out.

What cyber security frameworks should mining and resources use?

Mining and resources firms are well served by the ASD Essential Eight and ISO 27001 for their corporate IT, and by operational technology security standards such as IEC 62443 for their industrial control systems, since IT frameworks do not fully address OT. Where the Security of Critical Infrastructure Act applies, its risk management program requirements also apply. The key is covering both the IT and OT sides rather than only the corporate network.

What is the biggest cyber risk for mining and resources?

The biggest risks are attacks on operational technology that disrupt production or create safety hazards, and the theft of valuable intellectual property such as exploration and geological data. Ransomware that halts operations is especially damaging given the scale and cost of mining downtime. Because operations are often remote and OT is hard to patch, segmentation between IT and OT, strong access control and monitoring are priority defences.


Written by Gaurav Vikash, an ASD endorsed IRAP assessor and senior cyber security leader with 18 years of experience across Australia, the UK and Asia, including CISO and senior security leadership roles. He holds CISSP, CISA, CISM and CRISC and is an ISO 27001 Lead Auditor and ISO 42001 Lead Implementer, and speaks regularly at industry conferences.

Talk to us.

Sources:

  1. Australian Privacy Principles, Office of the Australian Information Commissioner, 2026
  2. Security of Critical Infrastructure Act 2018, Federal Register of Legislation, 2026
  3. Essential Eight, Australian Signals Directorate, 2026
  4. Principles of operational technology cyber security, Australian Signals Directorate, 2026

Last updated: 30 August, 2026

Talk to us about your engagement

A scoped proposal within one business day.