Cybernion
← Insights

Security

Cyber Security for Manufacturing Explained

30 Aug 2026 · Updated 30 Aug 2026

Manufacturing is one of the most attacked sectors globally because downtime is so costly that manufacturers are pressured to pay ransoms fast. The distinctive risk is factory-floor operational technology, where an attack can halt or damage production, on top of valuable design intellectual property. Some manufacturers are also caught by critical infrastructure law. Securing both the IT and OT environments, with the Essential Eight and ISO 27001 for IT and standards like IEC 62443 for OT, is the core of the job.

Manufacturing has quietly become one of the world’s most attacked sectors, and the reason is simple: a stopped production line bleeds money every hour, so manufacturers pay ransoms fast, and attackers know it.

Why is manufacturing a target for cyber attacks?

Manufacturing is consistently ranked among the most attacked sectors globally, and the core reason is intolerance of downtime. A manufacturer’s production line generates revenue continuously, and every hour it is stopped is a direct, mounting loss, along with disrupted supply commitments to customers. That economic pressure makes manufacturers more likely to pay a ransom quickly to get production moving again, which is exactly why ransomware operators target the sector so heavily. The business model of ransomware is built around victims who cannot afford to wait, and manufacturing fits that profile better than almost any other sector.

Beyond ransomware, manufacturers hold valuable intellectual property, product designs, formulas, and proprietary processes, which is attractive to competitors and state actors. And they run factory-floor operational technology, industrial control systems and connected machines, that is often old, built before cyber security was a concern, and hard to secure. The combination of extreme downtime sensitivity, valuable IP and vulnerable operational technology is what makes manufacturing such a favoured target, and it is why the sector’s cyber security has to focus on keeping production running as much as on protecting data.

What is the operational technology risk in manufacturing?

Operational technology, or OT, is the defining cyber risk on the factory floor. OT is the industrial control systems, programmable controllers and connected machines that run production, and it differs from ordinary IT in that an attack on it can have physical consequences, stopping the line, damaging equipment, or affecting product quality and worker safety, rather than only affecting information.

The difficulty is that manufacturing OT is often old, with equipment designed to run for decades and built for reliability rather than security, and it is hard to patch because taking a machine offline stops production. Historically this OT was isolated, but modern manufacturing increasingly connects it to corporate IT networks for monitoring, efficiency and data, part of the trend often called Industry 4.0. That convergence of IT and OT is where much of the risk now concentrates, because it gives an attacker who compromises the corporate network a potential path onto the factory floor. The most damaging manufacturing incidents typically involve ransomware or an attack reaching the production environment and halting it. Securing manufacturing therefore means protecting the IT and OT environments together, with particular care for the boundary between them, and IT security frameworks alone do not fully cover OT, which is why dedicated OT security standards are used as well.

What obligations do manufacturers have, and what frameworks should they use?

A manufacturer that meets the turnover threshold is covered by the Privacy Act and the Notifiable Data Breaches scheme for the personal information it holds, such as employee and customer data. That is the baseline. Some manufacturers are also caught by critical infrastructure law: food and grocery is one of the eleven critical infrastructure sectors under the Security of Critical Infrastructure Act, so food and beverage manufacturers in particular may be captured, and manufacturers operating assets in other covered sectors may be too. A manufacturer should check whether the SOCI Act applies to its specific products and assets rather than assume it is out, because being captured brings a risk management program and incident reporting obligations.

On frameworks, manufacturers need to cover both sides of their environment. For corporate IT, the Essential Eight and ISO 27001 are the right anchors. For factory-floor OT, dedicated OT security standards such as IEC 62443 are used, because IT frameworks do not fully address industrial control systems. Where the SOCI Act applies, its requirements apply on top. The priorities reflect the ransomware and OT risk: segmentation between IT and OT so an office-network breach cannot reach the line, tested and offline backups so the business can recover from ransomware without paying, strong access control especially for remote access, and prompt patching wherever it can be done safely. Anchor the corporate side to the Essential Eight, secure OT with an appropriate program, and meet SOCI where it applies. The mistake to avoid is protecting the office while leaving the factory floor exposed, because that is where the costly disruption happens. Where a manufacturing business wants help across its IT and OT and any critical infrastructure obligations, Cybernion helps through Essential Eight, ISO 27001 and critical infrastructure advisory.

Frequently asked questions

Why is manufacturing a target for cyber attacks?

Manufacturing is consistently among the most attacked sectors globally, largely because manufacturers cannot easily tolerate downtime. A halted production line costs money every hour, which makes manufacturers more likely to pay a ransom quickly, so ransomware operators target them heavily. Manufacturers also hold valuable intellectual property such as designs and processes, and run factory-floor operational technology that is often old and hard to secure, all of which adds to the appeal.

What is the operational technology risk in manufacturing?

Operational technology, the industrial control systems and connected machines on the factory floor, is a distinct risk because an attack on it can halt or damage physical production, not just affect data. This OT is often old, built for reliability rather than security, and hard to patch without stopping the line, yet increasingly connected to corporate IT networks. That IT and OT convergence gives attackers a path from the office network to the factory floor, which is the scenario with the most serious consequences.

What cyber security obligations do manufacturers have?

A manufacturer that meets the turnover threshold is covered by the Privacy Act and the Notifiable Data Breaches scheme for the personal information it holds. Some manufacturers are also caught by the Security of Critical Infrastructure Act, for example those in food and grocery, which is a critical infrastructure sector, or those operating assets in other covered sectors. Manufacturers should check whether the SOCI Act applies to their specific products and assets rather than assume it does not.

What cyber security frameworks should a manufacturer use?

Manufacturers are well served by the ASD Essential Eight and ISO 27001 for their corporate IT, and by operational technology security standards such as IEC 62443 for their factory-floor control systems, because IT frameworks do not fully address OT. Where the Security of Critical Infrastructure Act applies, its risk management program requirements also apply. Covering both the IT and OT environments, and the boundary between them, is the key.

What is the biggest cyber risk for manufacturing?

The biggest risk is ransomware that halts production, because downtime is so costly that manufacturers are heavily targeted and pressured to pay. Attacks on operational technology that stop or damage the production line, and theft of valuable designs and process intellectual property, are also serious. Segmentation between IT and OT, tested backups, strong access control and prompt patching where possible are the priority defences.


Written by Gaurav Vikash, an ASD endorsed IRAP assessor and senior cyber security leader with 18 years of experience across Australia, the UK and Asia, including CISO and senior security leadership roles. He holds CISSP, CISA, CISM and CRISC and is an ISO 27001 Lead Auditor and ISO 42001 Lead Implementer, and speaks regularly at industry conferences.

Talk to us.

Sources:

  1. Australian Privacy Principles, Office of the Australian Information Commissioner, 2026
  2. Security of Critical Infrastructure Act 2018, Federal Register of Legislation, 2026
  3. Essential Eight, Australian Signals Directorate, 2026
  4. Principles of operational technology cyber security, Australian Signals Directorate, 2026

Last updated: 30 August, 2026

Talk to us about your engagement

A scoped proposal within one business day.