State Government
What Is the Tasmanian Government Cyber Security Policy?
30 Aug 2026 · Updated 30 Aug 2026
The Tasmanian Government Cyber Security Policy is a short, principles based whole of government policy for Tasmania, authored by the Digital Strategy and Services division of the Department of Premier and Cabinet. It sets seven principles and delegates the detailed controls to separate Tasmanian Government Cyber Security Standards. It aligns to ISO 27001 and ISO 31000, not the Essential Eight, and agencies report annually to the Secretaries Board.
Tasmania took the opposite approach to Western Australia. Rather than a long controls baseline, it wrote a short policy of principles and pushed the technical detail into a separate standards document. Read the policy alone and there is not a single control to find.
What is the Tasmanian Government Cyber Security Policy?
The Tasmanian Government Cyber Security Policy is the whole of government cyber security policy for Tasmania. It is authored and maintained by the Digital Strategy and Services division of the Department of Premier and Cabinet (DPAC), and authorised by the Tasmanian Government Secretaries Board.
It is deliberately a short, high level document. Rather than list controls, it sets out seven policy principles, awareness, collaboration, enablement, integration, privacy and security, risk, and standards, along with responsibilities and a process for developing standards. It is one of the principal documents of the Tasmanian Government Information Management Framework. The detailed controls do not live in the policy. They live in separately developed Tasmanian Government Cyber Security Standards, which the policy governs the creation of. So the policy sets direction and accountability, and the standards carry the technical requirements. An older Tasmanian Government Information Security Policy and Manual, dating from around 2011, has been effectively superseded by this policy and the standards under it.
Who must comply with the Tasmanian Government Cyber Security Policy?
The policy applies to all Tasmanian Government agencies listed in Schedule 1 of the State Service Act 2000. Other organisations may choose to adopt it as good practice, but they are not required to.
There is a specific rule for shared services. Where an agency delivers whole of government or multi agency services, for example DPAC through Service Tasmania, that agency carries the compliance obligation for the services it delivers to other agencies. That keeps accountability with the body that actually runs the platform, rather than spreading it thinly across every consumer of the service. Suppliers are not bound directly by the policy. A vendor selling to a Tasmanian agency picks up the relevant requirements through the contract, in the same way as in the other states. The scope is narrower and simpler than Western Australia’s, which names universities and trading enterprises, because Tasmania anchors its scope to the State Service Act agency list.
Does the Tasmanian Government Cyber Security Policy require the Essential Eight?
No. The policy does not name the ASD Essential Eight. Its stated standards are AS ISO/IEC 27001 for cyber security management requirements, and AS/NZS ISO 31000 and ISO/IEC 27005 for risk management.
That is a real difference from most of the other states, which point at the Essential Eight as their technical baseline. Tasmania’s policy takes a risk based approach anchored to ISO 27001 and the ISO risk standards, and it requires agencies that deliver services to other agencies to develop, implement and maintain an information security management system. The Essential Eight may well appear in the separate Tasmanian Government Cyber Security Standards as an implementation choice, but it is not a named requirement in the policy itself. One thing to watch: the policy carries a stated review date of no later than January 2025, which has now passed, so the current version is due for refresh and its content may change. Check the DPAC site for the latest version rather than assuming this one is the newest.
How do Tasmanian agencies report under the Cyber Security Policy?
Each head of agency must report annually to the Secretaries Board on the agency’s implementation of the Tasmanian Government Cyber Security Standards, and must give timely notification of cyber security events and incidents to the Tasmanian Government Chief Information Officer.
So the reporting is against the standards, not the policy principles, which is consistent with the policy holding the direction and the standards holding the detail. The machinery behind it is a whole of government cyber security working group that develops the standards and reports to the Data and Digital Committee, with the Secretaries Board providing oversight. This is a lighter reporting model than the formal annual attestations run by New South Wales, Queensland and Western Australia. There is an annual report to the board and incident notification to the CIO, but not the same signed attestation against a numbered requirement set. That fits a smaller jurisdiction, though it also means the assurance picture is less granular than in the larger states.
How does the Tasmanian Government Cyber Security Policy relate to ISO 27001 and other frameworks?
The policy is built on ISO 27001 and the ISO risk standards, and it does not adopt the Commonwealth Protective Security Policy Framework or the ASD Information Security Manual as its baseline. For an agency, the practical anchor is ISO 27001.
An agency that runs an ISO 27001 information security management system already has much of what the policy asks for, particularly the requirement on shared service providers to operate an ISMS. The Tasmanian Government Cyber Security Standards then add the state specific detail on top. For a supplier, the evidence that lands best is the same as elsewhere, ISO 27001 certification and demonstrable technical controls, because the agency has to be able to show its own posture against the standards it reports on. This runs alongside the other jurisdictions in the state cyber security frameworks overview. For an organisation working out how to evidence a Tasmanian requirement, Cybernion helps through ISO 27001 and Essential Eight advisory and assessment.
Frequently asked questions
What is the Tasmanian Government Cyber Security Policy?
The Tasmanian Government Cyber Security Policy is the whole of government cyber security policy for Tasmania, authored by the Digital Strategy and Services division of the Department of Premier and Cabinet and authorised by the Secretaries Board. It is a short, principles based policy built on seven principles, and it delegates the detailed controls to separate Tasmanian Government Cyber Security Standards. It aligns to ISO 27001, ISO 31000 and ISO 27005 rather than the Essential Eight.
Who must comply with the Tasmanian Government Cyber Security Policy?
The policy applies to all Tasmanian Government agencies listed in Schedule 1 of the State Service Act 2000. Other organisations may adopt it as good practice. Agencies that deliver whole of government or multi agency services, such as through Service Tasmania, carry the compliance obligation for the services they deliver to other agencies. Suppliers are not bound directly, but pick up requirements through their contracts.
Does the Tasmanian Government Cyber Security Policy require the Essential Eight?
The policy does not name the ASD Essential Eight. It aligns to AS ISO/IEC 27001 for cyber security management and to AS/NZS ISO 31000 and ISO/IEC 27005 for risk management, and it takes a risk based approach. Agencies that deliver services to other agencies must develop, implement and maintain an information security management system. Detailed technical controls are in the separate Tasmanian Government Cyber Security Standards rather than in the policy itself.
How do Tasmanian agencies report under the Cyber Security Policy?
Each head of agency must report annually to the Secretaries Board on the agency’s implementation of the Tasmanian Government Cyber Security Standards, and must provide timely notification of cyber security events and incidents to the Tasmanian Government Chief Information Officer. Standards development is led by a whole of government cyber security working group that reports to the Data and Digital Committee, with Secretaries Board oversight.
What standards does the Tasmanian Government Cyber Security Policy align to?
The Tasmanian Government Cyber Security Policy names AS ISO/IEC 27001 for cyber security management requirements, and AS/NZS ISO 31000 and AS/NZS ISO/IEC 27005 for risk management. It is one of the principal documents of the Tasmanian Government Information Management Framework and references the Tasmanian Government’s digital strategy. It does not adopt the ASD Essential Eight or the Commonwealth Protective Security Policy Framework as its baseline.
Written by Gaurav Vikash, an ASD endorsed IRAP assessor and senior cyber security leader with 18 years of experience across Australia, the UK and Asia, including CISO and senior security leadership roles. He holds CISSP, CISA, CISM and CRISC and is an ISO 27001 Lead Auditor and ISO 42001 Lead Implementer, and speaks regularly at industry conferences.
Sources:
- Digital Strategy and Services — Policies, Department of Premier and Cabinet, 2026
- Tasmanian Government Cyber Security Policy V1.1, Department of Premier and Cabinet, November 2022
- Protective security — information security, Department of Premier and Cabinet, 2026
- Essential Eight, Australian Signals Directorate, 2026
Last updated: 30 August, 2026
