Cybernion
← Insights

Security

Australian Government Security Clearances Explained

30 Aug 2026 · Updated 30 Aug 2026

The Australian Government Security Vetting Agency grants Baseline, NV1 and NV2 clearances, mapped to PROTECTED, SECRET and TOP SECRET. The highest level, Positive Vetting, is being replaced by TOP SECRET-Privileged Access, managed by a vetting authority within ASIO. A person cannot apply directly, a clearance must be sponsored by an authorised organisation, and the level required is set by the classification of the information a role needs.

Security clearances cause confusion for three reasons: a person cannot get one on their own, the names are changing at the top, and the level required is decided by the information, not by the applicant. The detail below sets out how it actually works.

What are the Australian Government security clearance levels?

The Australian Government Security Vetting Agency (AGSVA) grants three clearances by their long standing names: Baseline, Negative Vetting 1 (NV1) and Negative Vetting 2 (NV2). Above those is the highest level, historically called Positive Vetting (PV), which is now being replaced by TOP SECRET-Privileged Access (TS-PA).

AGSVA is the central vetting agency for most of government, which is why clearances are portable between agencies rather than tied to one employer. The important current change is at the top of the scale. Positive Vetting is being phased out in favour of TS-PA, and TS-PA is managed by a separate vetting authority within the Australian Security Intelligence Organisation, not by AGSVA. The three lower levels, Baseline, NV1 and NV2, keep their names and remain with AGSVA. So in older guidance that lists Baseline, NV1, NV2 and PV, three of those four are unchanged and the fourth is being renamed and moved.

What can each Australian security clearance access?

The clearance level maps directly to the highest classification of information a person can access. The level required is determined by the information, not chosen for convenience.

Clearance Access up to and including
Baseline PROTECTED
Negative Vetting 1 (NV1) SECRET
Negative Vetting 2 (NV2) TOP SECRET
Positive Vetting, now TOP SECRET-Privileged Access TOP SECRET with privileged access

The classifications themselves come from the government’s protective marking scheme, which is covered in the government information classifications. The principle is need based: an agency identifies the classified information a role requires access to, and that sets the clearance level. Holding a higher clearance than the role needs is not the goal, and clearances are granted against a genuine and ongoing need. This is why a clearance is sponsored for a specific purpose rather than acquired speculatively.

How do we get an Australian Government security clearance?

A person cannot apply for a clearance themselves. A clearance must be sponsored by an authorised Australian Government agency or an eligible organisation, which confirms the applicant’s Australian citizenship before lodging the request. This surprises people who expect to be able to apply directly, but sponsorship is the gate.

The sponsor identifies the business need and the level required, and the vetting agency then conducts the assessment, which becomes more thorough at higher levels. The process for the lower levels has been streamlined, a 2024 amendment to the protective security policy removed the requirement for Commonwealth vetting agencies to obtain a statutory declaration, supporting a fully digital application through the vetting agency’s online portal. Where a person already holds, or recently held, a clearance at the required level, an organisation may be able to assume sponsorship of that existing clearance rather than start again, which is how clearances move with people between roles. For a business that needs cleared staff, sponsorship usually runs through membership of a program such as the Defence Industry Security Program.

How long is an Australian security clearance valid?

Clearances are revalidated on a cycle rather than expiring on a fixed date, and they are also subject to ongoing assessment in between. Indicative revalidation periods are around 15 years for Baseline, 10 years for NV1, and 5 to 7 years for NV2 and the top secret level, though these are subject to review and the higher levels fall in a range rather than a single figure.

Two things matter more than the headline numbers. First, a clearance is not fire and forget: holders carry continuing obligations to report changes in their circumstances, and a clearance can be reviewed at any time if something arises, not only at revalidation. Second, the periods are being adjusted as vetting reform proceeds, and the timing for the new TOP SECRET-Privileged Access level is being defined through its transition. So any specific revalidation figure is best treated as indicative, with the current position checked for the level that applies, because the vetting picture is actively changing at the top end.

What is replacing Positive Vetting, and how does it relate to the PSPF and DISP?

Positive Vetting is being replaced by TOP SECRET-Privileged Access (TS-PA), which standardises the highest clearances under a single vetting authority managed within the Australian Security Intelligence Organisation. The transition is phased over several years, existing Positive Vetting holders do not need to take action, and clearances are expected to transfer to TS-PA at revalidation. NV1 and NV2 are not affected.

All of this falls within the Protective Security Policy Framework, whose personnel security policy sets the eligibility and suitability requirements for clearances and the pre employment screening beneath them. For industry, the link is the Defence Industry Security Program: DISP members can sponsor and manage their own clearances, which is how defence suppliers get their people cleared, though there are limits on the highest levels a DISP member can sponsor. Where an organisation is working out what clearances a defence or government contract requires, that question falls alongside the broader security obligations Cybernion advises on through advisory and assessment.

Frequently asked questions

What are the Australian Government security clearance levels?

The Australian Government Security Vetting Agency (AGSVA) grants Baseline, Negative Vetting 1 (NV1) and Negative Vetting 2 (NV2) clearances. The highest level, previously Positive Vetting (PV), is being replaced by TOP SECRET-Privileged Access (TS-PA), which is managed by a separate vetting authority within the Australian Security Intelligence Organisation rather than AGSVA. Baseline, NV1 and NV2 keep their names and stay with AGSVA.

What can each Australian security clearance access?

A Baseline clearance allows access to classified resources up to and including PROTECTED. Negative Vetting 1 (NV1) allows access up to and including SECRET. Negative Vetting 2 (NV2) allows access up to and including TOP SECRET. The highest level, Positive Vetting, now transitioning to TOP SECRET-Privileged Access, covers TOP SECRET information with privileged access. The clearance level required is set by the classification of the information a person needs to access.

How do we get an Australian Government security clearance?

A person cannot apply for a security clearance themselves. A clearance must be sponsored by an authorised Australian Government agency or an eligible organisation, which confirms Australian citizenship before lodging the request. The sponsor identifies the business need and the level required, and the vetting agency then conducts the assessment. Where a person already holds a clearance at the required level, an entity may assume sponsorship of that existing clearance.

How long is an Australian security clearance valid?

Clearances are revalidated periodically rather than expiring on a fixed date. Indicative revalidation cycles are around 15 years for Baseline, 10 years for Negative Vetting 1, and 5 to 7 years for Negative Vetting 2 and the top secret level, though these are subject to review and to ongoing assessment between revalidations. Clearance holders also have continuing obligations to report changes in circumstances, and a clearance can be reviewed at any time.

What is replacing Positive Vetting in Australia?

Positive Vetting (PV) is being replaced by a new highest level clearance called TOP SECRET-Privileged Access (TS-PA). The change standardises top secret clearances under a single vetting authority managed within the Australian Security Intelligence Organisation. The transition is phased over several years, and existing Positive Vetting holders do not need to take action, with clearances expected to transfer to TS-PA at revalidation. Negative Vetting 1 and 2 are not affected and remain with AGSVA.


Written by Gaurav Vikash, an ASD endorsed IRAP assessor and senior cyber security leader with 18 years of experience across Australia, the UK and Asia, including CISO and senior security leadership roles. He holds CISSP, CISA, CISM and CRISC and is an ISO 27001 Lead Auditor and ISO 42001 Lead Implementer, and speaks regularly at industry conferences.

Talk to us.

Sources:

  1. Security clearance definitions, Australian Government Security Vetting Agency, 2026
  2. Security Clearance Applicant Guide Book, Australian Government Security Vetting Agency, September 2025
  3. Changes to top secret security clearances, Department of Defence, 20 November 2025
  4. Policy 12 — Eligibility and suitability of personnel, Protective Security Policy Framework, 2026

Last updated: 30 August, 2026

Talk to us about your engagement

A scoped proposal within one business day.