DISP
DISP Membership Levels: Which One Does Your Defence Contract Need?
3 July 2026 · Updated 3 July 2026
The Defence Industry Security Program (DISP) has four membership levels: Entry Level, Level 1, Level 2 and Level 3. They map to OFFICIAL, PROTECTED, SECRET and TOP SECRET. An entity chooses a level for each of four security domains, not one for the whole business, and anything above Entry Level has to be justified with a real business case.
Most people ask which DISP level they need as if it is a single answer. It is four answers, one per domain, and the right ones are usually lower than businesses assume.
How many DISP membership levels are there?
There are four Defence Industry Security Program (DISP) membership levels: Entry Level, Level 1, Level 2 and Level 3. They align directly to the Australian Government security classifications that determine what information an entity is accredited to handle. Entry Level covers OFFICIAL and OFFICIAL: Sensitive, Level 1 covers PROTECTED, Level 2 covers SECRET, and Level 3 covers TOP SECRET. For a complete overview of the program before getting into the levels, see what DISP is.
The number that matters is not one level for the business. DISP membership is granted across four security domains, and an entity picks a level in each. So a business could be Level 1 in one domain and Entry Level in another. The only fixed rule is that the security governance domain always equals the highest level applied for in any of the other three domains. That keeps governance in step with the most sensitive work the entity does.
What does each DISP membership level allow?
Each DISP level ties a classification to what an entity’s people can be cleared to and what its facilities and networks can hold. The table below maps the four levels to their classification and the typical personnel clearance that goes with them.
| DISP level | Classification | What it allows | Typical personnel clearance |
|---|---|---|---|
| Entry Level | OFFICIAL / OFFICIAL: Sensitive | Handle OFFICIAL and OFFICIAL: Sensitive information; cannot sponsor clearances | None; clearances sponsored by Defence or another agency |
| Level 1 | PROTECTED | Handle and store PROTECTED information; sponsor clearances at Baseline | Baseline |
| Level 2 | SECRET | Handle and store SECRET information; sponsor clearances up to NV1 | Negative Vetting 1 (NV1) |
| Level 3 | TOP SECRET | Handle and store TOP SECRET information; sponsor clearances up to NV2 | Negative Vetting 2 (NV2) |
A DISP Security Officer needs a minimum NV1 clearance to sponsor clearances. DISP members cannot sponsor Positive Vetting (PV) clearances; that requires Defence sponsorship at a senior level. For the clearances themselves, see how DISP costs stack up.
Which DISP level does our Defence contract require?
The DISP level a Defence contract requires is driven by the highest classification of information or assets involved and whether the entity needs to sponsor clearances. There are two ways it gets set. Either a current or upcoming Defence contract states the level directly, or, without a contract specifying it, the entity maps its work to the security domains and classifications.
Where classified information is not physically stored on the premises and the networks do not hold PROTECTED or above, Defence directs the entity to select Entry Level for physical and ICT security. The personnel level is raised only where clearances must be sponsored. The practical answer for most new entrants is Entry Level across the board, with personnel lifted to Level 1 or 2 if cleared staff are actually required. The mechanics of selecting each level are covered in how to apply for DISP.
Why is DISP Level 3 harder than Level 1?
DISP Level 3 is harder than Level 1 because everything scales with the classification. Level 3 aligns to TOP SECRET, so personnel need NV2 clearances rather than Baseline, facilities need certification and accreditation to hold TOP SECRET assets, and ICT networks need accreditation to the matching classification.
Defence is explicit that a higher membership level means a more rigorous, complex and time consuming application and assessment process, greater ongoing governance and administration, and higher costs for physical and ICT infrastructure and accreditation. Processing time reflects it too: Entry Level runs about two to three months, while Levels 1, 2 and 3 run about four to six months once clearances and accreditations are in place. This is why applying higher than needed is a genuine cost, not a safety margin.
Do we need business justification for a higher DISP level?
Yes. Applying for DISP Level 1, 2 or 3 requires an appropriate business case, and Defence states plainly that holding a Defence contract alone is not sufficient justification. It takes a demonstrated need, such as working on a highly classified program or project.
Without a contract that specifies a level, business need is demonstrated through a Notice of Engagement from a Defence Contract Manager, a letter of endorsement for an upcoming contract, or a letter of endorsement from a sponsoring entity when subcontracting. The point of the justification requirement is to stop entities over scoping their membership, because a higher level carries real cost and governance weight for no benefit if the work does not need it. A membership level can also be upgraded or downgraded after it is granted, so starting lower is not a trap. Cybernion’s IRAP assessment service covers the ICT and cyber security work that all DISP levels require.
Frequently asked questions
How many DISP membership levels are there? There are four DISP membership levels: Entry Level, Level 1, Level 2 and Level 3. They align to Australian Government security classifications, mapping to OFFICIAL and OFFICIAL Sensitive, PROTECTED, SECRET and TOP SECRET respectively. An entity selects a level for each of the four security domains rather than one level for the whole business.
What DISP level does our Defence contract require? The DISP level a Defence contract requires is set by the highest classification of information or assets the entity will handle, store or process, and by whether it needs to sponsor security clearances. A contract may specify the level directly. If it does not, the entity maps its work to the classifications, applies Entry Level where it can, and goes higher only where the work clearly demands it.
Can a business have different DISP levels for different domains? Yes. An entity is entitled to hold different DISP membership levels across the four security domains. A business might hold Level 1 for personnel security to sponsor clearances while staying at Entry Level for physical and ICT security if it does not store classified information on site. The security governance level always equals the highest level held in any other domain.
What is the difference between DISP Level 1, 2 and 3? DISP Level 1 covers PROTECTED information and personnel clearances at Baseline. Level 2 covers SECRET information and clearances up to Negative Vetting 1. Level 3 covers TOP SECRET information and clearances up to Negative Vetting 2. Each step up means more rigorous assessment, more governance, and higher costs for clearances and facility accreditation.
Does holding a Defence contract justify a higher DISP level? No. Holding a Defence contract alone is not sufficient justification for a higher DISP membership level. Defence requires an appropriate business case for Level 1, 2 or 3, such as working on a highly classified program. Entities are directed to apply at Entry Level for physical and ICT security unless they have existing certification or an explicit contract requirement for more.
Written by Gaurav Vikash, an ASD endorsed IRAP assessor and senior cyber security leader with 18 years of experience across Australia, the UK and Asia, including CISO and senior security leadership roles. He holds CISSP, CISA, CISM and CRISC and is an ISO 27001 Lead Auditor and ISO 42001 Lead Implementer, and speaks regularly at industry conferences.
Sources:
- DISP eligibility and suitability, membership levels and security domains, Department of Defence, accessed 3 July 2026
- Applying for DISP Membership factsheet (Version 3), Department of Defence, February 2025
- Security clearance definitions, Australian Government Security Vetting Agency, accessed 3 July 2026
Last updated: 3 July, 2026
