Cybernion
← Insights

Privacy

What Is the Australian Government Digital ID System?

30 Aug 2026 · Updated 30 Aug 2026

The Australian Government Digital ID System lets people verify their identity online once and reuse it across services, underpinned by the Digital ID Act 2024, which commenced on 1 December 2024. Providers must be accredited under one of three types, meet security and privacy requirements including the Essential Eight, and identities are established at proofing levels from IP1 to IP4. myID, formerly myGovID, is part of the system.

Digital ID is Australia’s attempt to stop people handing over their passport and licence to every service that needs to check who they are. The Digital ID Act 2024 gave it a legal foundation, an accreditation scheme, and real security obligations.

What is the Australian Government Digital ID System?

The Australian Government Digital ID System (AGDIS) lets a person verify their identity online once, with an accredited provider, and reuse that verified identity across participating services rather than proving themselves from scratch each time. The aim is to reduce how often identity documents are shared and stored, which reduces the data available to be breached.

It is underpinned by the Digital ID Act 2024 and includes myID, the Australian Taxation Office’s identity app, which was renamed from myGovID in late 2024 to reduce confusion with myGov. myID operates as an identity provider within the system. The design intent is a network, not a single database: a person’s identity is verified by a provider, and information is passed between providers and the services that rely on it through a controlled exchange, with the person’s consent. Over time the system is designed to extend beyond Commonwealth services to states, territories and the private sector, which is why the accreditation and privacy rules around it matter.

What is the Digital ID Act 2024?

The Digital ID Act 2024 is the law that established Australia’s national Digital ID System, and it commenced on 1 December 2024. It gives the system a statutory basis, rather than the administrative framework that preceded it, which is a meaningful upgrade in how it is governed.

The Act does several things. It enables the Commonwealth to partner with states, territories and the private sector on a single Digital ID System. It establishes an accreditation scheme that providers must meet to participate. And it creates privacy safeguards that layer over the Privacy Act, with penalties for accredited providers that fail to protect the privacy or security of identity information. It replaced the earlier Trusted Digital Identity Framework arrangements, transitioning accredited providers onto the new statutory rules. The move from an administrative framework to legislation is the significant change: it makes the obligations enforceable and gives the regulators clear powers, which is what a national identity system needs.

What are the Digital ID accreditation types?

The Digital ID (Accreditation) Rules 2024 provide for three kinds of accredited digital ID service. Getting the number right matters, because older guidance referred to four.

The three are the Identity Service Provider, which verifies and manages a person’s identity, the Attribute Service Provider, which verifies specific attributes such as a qualification or a professional registration, and the Identity Exchange Provider, which conveys information between providers and the services relying on the identity. This is a change from the predecessor Trusted Digital Identity Framework, which had a fourth class, the Credential Service Provider, that is not carried across as a separate accreditation type under the new rules. Accreditation is overseen by two regulators: the Australian Competition and Consumer Commission acts as the Digital ID Regulator, making accreditation decisions and monitoring compliance, and the Office of the Australian Information Commissioner is the privacy regulator for the system. So a provider is accredited against one of three defined roles and answers to both a system regulator and a privacy regulator.

What security and privacy requirements does Digital ID accreditation involve?

Accreditation sets a substantial security and privacy bar, because a digital identity provider holds some of the most sensitive data there is. On the security side, accredited entities must implement a recognised protective security framework such as the PSPF or ISO 27001 or an equivalent, conduct annual cyber security risk assessments, undergo penetration testing generally each year, comply with the ASD Essential Eight, and maintain incident detection and monitoring.

On the privacy side, the requirements include completing privacy impact assessments before accreditation, complying with the Australian Privacy Principles and applicable privacy codes, obtaining express consent for collection, maintaining a separate privacy management plan for the accredited service, and segregating identity data within a defined environment. An annual review checks that the entity continues to meet these obligations, and recognised assessment approaches include ISO 19011 audit principles, the ASD’s IRAP, or NATA accreditation. This is one of the more demanding accreditation regimes in Australia, which is appropriate given the consequences of a digital identity provider being compromised. For a provider pursuing accreditation, much of the work is evidencing an existing ISO 27001 or PSPF aligned program against the specific Digital ID rules.

What are the Digital ID identity proofing levels?

The Digital ID System establishes identities at defined proofing levels, grouped by strength, so that a service can require an identity proven to the level its sensitivity warrants. Basic strength covers IP1 and IP1 Plus, Standard strength covers IP2 and IP2 Plus, and Strong strength covers IP3, with IP4 as the highest level for the most sensitive services.

The levels differ in how much verification is required to establish the identity. A lower level may require little or no verified documentation, while higher levels require multiple verified identity documents and stronger checks. Each proofing level pairs with an authentication level that governs how the person signs in, ranging from single factor at the lowest through multi factor to device based multi factor at the highest. The practical point for a service is that it chooses the proofing and authentication levels that match its risk: a low risk service might accept a basic identity, while a service handling sensitive information requires a strong one. This graduated model is what lets a single system serve everything from a low stakes sign in to access that demands high assurance. Where an organisation is building toward Digital ID accreditation or aligning to its requirements, Cybernion helps through ISO 27001 and Essential Eight advisory and assessment.

Frequently asked questions

What is the Australian Government Digital ID System?

The Australian Government Digital ID System (AGDIS) lets people verify their identity online once and reuse it across participating government and, over time, private services, without handing over identity documents each time. It is underpinned by the Digital ID Act 2024, which commenced on 1 December 2024, and it includes myID, the ATO’s identity app previously called myGovID. It is designed with privacy safeguards and penalties for accredited providers that fail to protect identity information.

What is the Digital ID Act 2024?

The Digital ID Act 2024 is the law that established Australia’s national Digital ID System, commencing on 1 December 2024. It enables the Commonwealth to partner with states, territories and the private sector on a single Digital ID System, sets an accreditation scheme for digital ID providers, and creates privacy safeguards additional to the Privacy Act, with penalties for accredited providers that fail to protect privacy or security. It replaced the earlier Trusted Digital Identity Framework arrangements.

What are the Digital ID accreditation types?

The Digital ID (Accreditation) Rules 2024 provide for three kinds of accredited digital ID service, an Identity Service Provider that verifies and manages identities, an Attribute Service Provider that verifies attributes such as qualifications, and an Identity Exchange Provider that conveys information between providers and relying parties. This is a change from the earlier Trusted Digital Identity Framework, which had a fourth class, the Credential Service Provider, that is not carried across as a separate accreditation type.

What security requirements does Digital ID accreditation involve?

Accredited entities must implement a protective security framework such as the PSPF or ISO 27001 or equivalent, conduct annual cyber security risk assessments, undergo penetration testing generally each year, comply with the ASD Essential Eight, and maintain incident detection and monitoring. They must also complete privacy impact assessments, comply with the Australian Privacy Principles, maintain a privacy management plan, and segregate identity data. An annual review checks ongoing compliance.

What are the Digital ID identity proofing levels?

The Digital ID System uses identity proofing levels grouped by strength. Basic covers IP1 and IP1 Plus, Standard covers IP2 and IP2 Plus, and Strong covers IP3, with IP4 as the highest level for the most sensitive services. Each proofing level pairs with an authentication level, from single factor at the lowest to device based multi factor at the highest. The level required depends on how sensitive the service being accessed is.


Written by Gaurav Vikash, an ASD endorsed IRAP assessor and senior cyber security leader with 18 years of experience across Australia, the UK and Asia, including CISO and senior security leadership roles. He holds CISSP, CISA, CISM and CRISC and is an ISO 27001 Lead Auditor and ISO 42001 Lead Implementer, and speaks regularly at industry conferences.

Talk to us.

Sources:

  1. Digital ID Act 2024: What’s changing from 1 December 2024, Digital ID System, November 2024
  2. Digital ID (Accreditation) Rules 2024 — Explanatory Statement, Federal Register of Legislation, 12 November 2024
  3. Digital ID regulation, Australian Competition and Consumer Commission, 2026
  4. Digital ID, Office of the Australian Information Commissioner, 2026
  5. myGovID is now called myID, Australian Taxation Office, November 2024

Last updated: 30 August, 2026

Talk to us about your engagement

A scoped proposal within one business day.